RG 58
RG-58 is a coaxial cable that is used for wiring purposes. A coaxial cable, in general, consists of an inner conductor that is surrounded by a spacer. The coaxial cable is electrically charged and sometimes consists of different uninsulated conductors that remain entangled with one another. The insulating spacer of the cable is further surrounded by a sheath that is cylindrical in shape. The final circle is formed by an insulating jacket. The insulation surrounding the RG-58 cable carries a low impedance of around 50 or 52 ohms. It is generally used for generating signal connections that are of low power.
RG-58 Specifications:
Type | RG-58 | RG-58A | RG-58B | RG-58C |
Impedance Z0(Ω) | 53.5 | 52 | 53.5 | 50 |
Dielectric | Solid Polyethylene | Solid Polyethylene | Solid Polyethylene | Solid Polyethylene |
Time Delay (ns/ft) | 1.54 | 1.54 | 1.54 | 1.54 |
Propagation Velocity (% of c) | 65.9 | 65.9 | 65.9 | 65.9 |
Capacitance (pF/foot) | 28.8 | 29.6 | 28.8 | 30.8 |
Outside Dimensions (inches) | 0.195 | 0.195 | 0.195 | 0.195 |
dB/100ft @400MHz | 11.7 | 13.2 | 14 | 14 |
Maximum Voltage (Vrms) | 1900 | 1900 | 1900 | 1900 |
Shield | Braid | Braid | Braid | Braid |
The RG-58 cable is specially designed to work with most two-way-radio systems. This communication system is different from the usual broadcast receiver because the latter can receive data from one end only. In case of the two-way radio system, which can be generated by the RG-58 cable, content travels in both directions. The radio can receive and transmit data at the same time. It is also called a transceiver. The transmitter is activated by means of a push-to-talk button. These radio systems work with the 50-ohm RG-58 cable. Examples of such radio systems are marine SSB transmitters, CB-radio's, Equipment for HAM Radio-amateurs, fire-department, WLAN-antennas, and marine VHF.
The RG-58 can also be used for higher frequencies. The range, however, remains fairly moderate. The coaxial cable that is used for generating the power signals is usually a quarter-inch in diameter. The Ethernet wiring for which the RG-58 cable is used is sometimes termed “cheapernet”, since it draws low-power signal connections. There are several well-known manufacturers that have excelled in the field of manufacturing high-quality RG-58 cables for wiring. The RG-58 cables are used for both domestic and industry purposes. They are highly advanced in telecommunications, which is primarily generated by means of the coaxial cable and the BNC connector
- Stock: In Stock
- Model: RG 58