REDOT 2017A
REDOT 2017A
REDOT 2017A
Specifications:
- Frequency Range: 1.6-60Mhz
- MAX.POWER: 199W
- VSWR: 1.00~19.9
- Display:31/1 LCD
- Conversion Resolution:100/S,12BIT
- Insertion loss:< 0.2 dB
- Direction:> 30 dB
- Temperature : 0℃~70℃
- Battery:3 x AAA Type Battery ,<3mA ( light off )(battery not included in this sale)
- Size: 67 x 69 x 37 (mm)
- Interface:UHF-KF(SO239)
- Net Weight: 300g
Battery installation:
- Remove 4 black round screws on the corner of back cover and open it.
- Install 3 AAA batteries.
- BE CAUTIOUS to the polarities.
- Put the cover on and fasten the screws.
⇒ IMPROPER INSTALLATION OF BACK COVER WILL CAUSE ERROR ON U-BAND MEASUREMENT!
Measurment:
Connect the Output of your transceiver to "TX" and Antenna or Load to "ANT".
NOTE: UV-Band meter utilize "N" type connectors.
Proper adaptor/cable is required if your device has different type of connectors.
NOTE: UV-Band meter utilize "N" type connectors.
Proper adaptor/cable is required if your device has different type of connectors.
Press the red button to power on.
- After 2 seconds of LCD self test, it's ready for normal measurement.
- UV-Band meter will display in sequence:"+ XXX P" (pass through power),"- XXX P" (feed back power)," XXX Γ" (SWR value), 2 seconds display for each mode.
- Press the red button will hold the current display. Press it again to continue the display.
- Under the environment of night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on.
- Press and hold the red button for 1 second again to turn it off.
⇒ 8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually.
€89.95
Ex Tax: €74.34
- Stock: In Stock
- Model: REDOT 2017A